Series:
PEMU
Application:
Liquid Filtration
Materials:
Polyester Multifilament
Bag Size:
01 and 02
Snap Ring Seals
Multifilament filter bags are suitable for surface filtration and available in a broad range of retention ratings.
These filter bags remove effectively solid particles larger than the respective pore size, but not rated as absolute.
Material:
PEMU - Polyester Multifilament
Micron Rating:
100, 125, 150, 175 and 200 micron.
Cover Layer:
P - No Cover
Size:
01 - Ø178mm x 420mm
02 - Ø178mm x 810mm
02 - Ø178mm x 810mm
Seal Ring
S - Snap Ring (316 Stainless Steel)
Retention Type
Nominal
Code Example:
PEMU-100-PO2S (Snap Ring)
Filter Area:
01 Size - 0.24 m²
02 Size - 0.48 m²
02 Size - 0.48 m²
Max. Differential Pressure:
2.5 bar (36 psi)
Recommended Change Out:
≈ 0.8 to 1.5 bar (11 to 22 psi)
Max. Operating Temperature:
NMO - <140°C
Max. Flow Rates:
01 Size - 20 m³/h
02 Size - 40 m³/h
For fluids with a dynamic viscosity of 1 mPa∙s @ 20 °C
02 Size - 40 m³/h
For fluids with a dynamic viscosity of 1 mPa∙s @ 20 °C
Features and benefits:
- Material is free from crater-forming substances (such as silicones etc.)
- Constructed of multiple woven fibers that maximize filter bag strength at an economical cost
- Water treatment
- Paints and varnishes
- Lacquers
- Inks
- Resins
- Chemicals
- Solvents and many more
Brochure and Datasheet Downloads
Monarch Asia Pacific Pty Ltd
ABN 60 141 555 688
Unit 3, 8 Bult Drive, Brendale, QLD 4500
P.O. Box 4511, Brendale, QLD 4500
AUSTRALIA
Phone: +61 (0) 7 3889 9949
Mirror: www.monarchasiapacific.com.au
Monarch Asia Pacific Pty Ltd, Copyright © 2022 All Rights Reserved
Release: 22:1:1